Reconnect CFE and initial error checks

Once you "Pull" Centralized data.mdb you need to initialise the program and make sure that you have consistent initial data.

Instructions

• Click the "Re-connect Data" button
• Screen prompt 'Could not find file ... DSM...', answer YES
• Not asking anymore about the DSM only the Tiss.PTorres 16:29, 2021 November 24 (CST)

Fix why it gives this error as part of fixing DSM process. I think this error is fixed. Emailed Pagasa to confirm. Ttenbergen 14:29, 2021 November 18 (CST)

added: no added date action: no action date

• Cargo

• Categories

• The program will now reset the connections from CFE to Centralized data.mdb, PHI.mdb and TISS28 Data.mdb
• No more connections onTISS28 Data.mdb in CFE .PTorres 16:33, 2021 November 24 (CST)
• the reconnector will confirm if L_Log table and L_PHI table have the same records in them. If they don't there will be an error; see Procedure when there are differences between L Log and L PHI for how to proceed
• Run initial cross checks:
  • PL_1orphans- see Orphans in Centralized data.mdb for what to do about these.
  • PL missing L Tables content
    • for now there are some CCIs on this list.

Tina will fix Query check CCI must have entry so those are caught going forward. Are these still showing up? Emailed Pagasa...Ttenbergen 14:30, 2021 November 18 (CST)

added: no added date action: no action date

• Cargo

• Categories

• • • Generally, errors in missing are the result of a failed send, so follow Cleaning up a failed send to fix.

re-name these so not PL any more

added: no added date action: no action date

• Cargo

• Categories

• Continue what you were doing, likely the next step of Centralized data Vetting Process: Pre-linking checks