DeviceUse Study: Difference between revisions

Line 41:

* If the device is '''removed or stopped for a few days''' and then a new device is used, a new set of entries is required to get an accurate duration for the device.

*Each item must have a partner: For example if central line "in" is an option, then central line "out" must be entered. If it remains in after discharge then the box is ticked in the "out" option. "Start" items must be paired with "stop" items and "in" items must be paired with "out" items. When you send, if the paired items are not entered for your completed pts, you will get a list of errors when you check your pre-send checker.

** Another example: when both 'ETT in and Vent start' are simultaneous , then the vent was stopped but kept the ETT in and was removed later on another date, then only 3 date_times ~~will~~ be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).

** Another example: when both 'ETT in and Vent start' are simultaneous , then the vent was stopped but kept the ETT in and was removed later on another date, then only 3 date_times should be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).

*Call me if you are unclear about these rules and I will try to clarify. You can always Page me and I will respond ASAP. Pager 932-0653 if you need help on the spot with this. --[[User:LKolesar|LKolesar]] 07:06, 20 October 2011 (CDT)

@@ Line 41: / Line 41: @@
 * If the device is '''removed or stopped for a few days''' and then a new device is used, a new set of entries is required to get an accurate duration for the device.
 *Each item must have a partner:  For example if central line "in" is an option, then central line "out" must be entered.  If it remains in after discharge then the box is ticked in the "out" option.  "Start" items must be paired with "stop" items and "in" items must be paired with "out" items.   When you send, if the paired items are not entered for your completed pts, you will get a list of errors when you check your pre-send checker.
-** Another example: when both 'ETT in and Vent start' are simultaneous , then the vent was stopped but kept the ETT in and was removed later on another date, then only 3 date_times will be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).
+** Another example: when both 'ETT in and Vent start' are simultaneous , then the vent was stopped but kept the ETT in and was removed later on another date, then only 3 date_times should be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).
 *Call me if you are unclear about these rules and I will try to clarify.  You can always Page me and I will respond ASAP.  Pager 932-0653 if you need help on the spot with this.  --[[User:LKolesar|LKolesar]] 07:06, 20 October 2011 (CDT)