DeviceUse Study: Difference between revisions

Line 23:

* For each of the following devices, enter an in and out record or start and stop record for each device present:

** on "in" or "start" record, tick off "present on admission" instead of entering a date if the device is present on admission

*** if date is absent and the box is ticked , the Statistician will use the Admit Date/Time as the "in" or "start" date

*** if date is present and is different from Admit Date/Time, there is no need to tick the box.

** on "out" or "stop" record, tick off "present on discharge" instead of entering a date if the device is present on discharge

*** if date is absent and the box is ticked , the Statistician will use the Discharge Date/Time as the "out" or "stop" date

*** if date is present and is different from Discharge Date/Time, there is no need to tick the box.

** devices:

*** Central line (first in and last out)

Line 40:

Line 44:

**** Home bipap or cpap is included in this study.

* If the device is '''removed or stopped for a few days''' and then a new device is used, a new set of entries is required to get an accurate duration for the device.

* If the patient is in ventilator on admission, choose the device "ETT in & vent start" and not the "zVent start" and tick the box.

*Each item must have a partner: For example if central line "in" is an option, then central line "out" must be entered. If it remains in after discharge then the box is ticked in the "out" option. "Start" items must be paired with "stop" items and "in" items must be paired with "out" items. When you send, if the paired items are not entered for your completed pts, you will get a list of errors when you check your pre-send checker.

** Another example: when both 'ETT in and Vent start' are simultaneous , then the vent ~~was stopped~~ but kept the ETT in and was removed later on another date, ~~then~~ only 3 date_times should be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).

** Another example: when both "ETT in and Vent start" are simultaneous , then decided to stop the vent but kept the ETT in and then the ETT was removed later on another date, only 3 date_times should be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).

*** Example of Valid pairings

****"ETT in and Vent start" and "ETT out and Vent stop"

****"ETT in and Vent start" and "Zvent_stop" followed by "ZETT_out"

****"ETT in" and "ETT out"

****"ZVent start" and "ZVent stop"

*** Example of NOT valid pairings

****"ETT in and Vent start" and "ZETT_stop" followed by "ZVent_out"

****"ETT in and Vent start" and "ZETT_stop" only

****"ETT in and Vent start" and "ZVent_out" only

****"ZETT in" and "ETT out and Vent stop"

****"ZETT in" and "ZVent_out"

****"ZVent start" and "ETT out and Vent stop"

****"ZVent start" and "ZETT out"

*Call me if you are unclear about these rules and I will try to clarify. You can always Page me and I will respond ASAP. Pager 932-0653 if you need help on the spot with this. --[[User:LKolesar|LKolesar]] 07:06, 20 October 2011 (CDT)

@@ Line 23: / Line 23: @@
 * For each of the following devices, enter an in and out record or start and stop record for each device present:
 ** on "in" or "start" record, tick off "present on admission" instead of entering a date if the device is present on admission
+*** if date is absent and the box is ticked , the Statistician will use the Admit Date/Time as the "in" or "start" date
+*** if date is present and is different from Admit Date/Time, there is no need to tick the box.
 ** on "out" or "stop" record, tick off "present on discharge" instead of entering a date if the device is present on discharge
+*** if date is absent and the box is ticked  , the Statistician will use the Discharge Date/Time as the "out" or "stop" date
+*** if date is present and is different from Discharge Date/Time, there is no need to tick the box.
 ** devices:
 *** Central line (first in and last out)
@@ Line 40: / Line 44: @@
 **** Home bipap or cpap is included in this study.
 * If the device is '''removed or stopped for a few days''' and then a new device is used, a new set of entries is required to get an accurate duration for the device.
+* If the patient is in ventilator on admission, choose the device "ETT in & vent start" and not the "zVent start" and tick the box.
 *Each item must have a partner:  For example if central line "in" is an option, then central line "out" must be entered.  If it remains in after discharge then the box is ticked in the "out" option.  "Start" items must be paired with "stop" items and "in" items must be paired with "out" items.   When you send, if the paired items are not entered for your completed pts, you will get a list of errors when you check your pre-send checker.
-** Another example: when both 'ETT in and Vent start' are simultaneous , then the vent was stopped but kept the ETT in and was removed later on another date, then only 3 date_times should be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).
+** Another example: when both "ETT in and Vent start" are simultaneous , then decided to stop the vent but kept the ETT in and then the ETT was removed later on another date, only 3 date_times should be recorded namely 1) ETT_in & Vent_start, 2) Zvent_stop, 3) ZETT_out. Despite only having 3 dates, the partners are satisfied (eg. ETT_in & vent_start will be partner for both Zvent_stop and ZETT_out).
+*** Example of Valid pairings
+****"ETT in and Vent start" and "ETT out and Vent stop"
+****"ETT in and Vent start" and "Zvent_stop" followed by "ZETT_out"
+****"ETT in" and "ETT out"
+****"ZVent start" and "ZVent stop"
+*** Example of NOT valid pairings
+****"ETT in and Vent start" and "ZETT_stop" followed by "ZVent_out"
+****"ETT in and Vent start" and "ZETT_stop" only
+****"ETT in and Vent start" and "ZVent_out" only
+****"ZETT in" and "ETT out and Vent stop"
+****"ZETT in" and "ZVent_out"
+****"ZVent start" and "ETT out and Vent stop"
+****"ZVent start" and "ZETT out"
 *Call me if you are unclear about these rules and I will try to clarify.  You can always Page me and I will respond ASAP.  Pager 932-0653 if you need help on the spot with this.  --[[User:LKolesar|LKolesar]] 07:06, 20 October 2011 (CDT)