Main office scanning problems
- 2016_April_15: Since Dec 2015, Pagasa is using the glass on scanner rather than document feed particularly for TISS most of the days filled. (having to flip over pages manually one by one to do this). This takes more time to scan TISS forms however, this produces better quality of scans, they are not crooked, and she has less problems with Teleform reading crooked scans and then having to rescan. Perhaps we can obtain different fax/printer/scanner, find one with more reliable document feed suitable? - Trish Ostryzniuk 16:52, 2016 April 15 (CDT)
- We discussed that Pagasa would start by contacting the helpdesk about this to confirm the scanner is working as well as it can.
- 2016_April_19: eHealth came by. They will contact vendor to look at and if document feed roller needs to be replaced.
- 2016_April_19: vendor came by office today and replaced tray 1 pick up tires and ADF roller. This did not resolve the crooked scans. As it was tested after replacing these parts. Vendor will order document feed part and replace when it comes in. Pagasa will report if scanning improved when document feed part replaced.
- Feedback from repair person is that this type of scanner/printer/fax, is not suitable for the volume of scanning we are doing.
- If that does not improve the situation, we can "test the model" Accuro uses, would need to coordinate with Kym Morris.
- Note; Pagasa's feedback is that this solution is nto suitable to workflow, as she will be running in and out of office often, even just to rescan a form. it would be very disruptive to her other daily Task that she must do.
- We discussed that Pagasa would start by contacting the helpdesk about this to confirm the scanner is working as well as it can.
- Also asked Pagasa to show Tina next time a form is not scanned straight so we can check on the interface in Teleform to see if there are different ways to use.
- Finally, we have a new version of Teleform that needs to be installed, maybe it will cope better with bad scans. Ttenbergen 11:26, 2016 April 18 (CDT)
- 2016_Dec_29 - scanning is misaligning. Pick up long dirty streaks from roller. During vacation break Sheila Rusnak had to scan forms on flatbed one by one because too many were miss read by Teleform. ServiceDesk came by 2017_Jan-5: nothing done. Streaking on scanned forms gone. Resolved for now. Trish Ostryzniuk 16:53, 2017 January 13 (CST)