Arrive DtTm field
| Data Element (edit) | |
| Field Name: | Arrive_DtTm |
| CCMDB Label: | Arrive DtTm |
| CCMDB tab: | not stated |
| Table: | L_Log |
| Data type: | date |
| Length: | not stated |
| Program: | Med and CC |
| Created/Raw: | Raw |
| Start Date: | 2016-07-01 |
| End Date: | 2300-01-01 |
| Sort Index: | 45 |
Date and time when the patient physically arrived on unit.
As in, arrived at (Service/Location field).
Collection Instruction
For each patient enter the date and time when the patient physically arrived on the ward. For off ward patients,
- if the patient never does arrive on your unit, then the Arrive DtTm will be the same time as the Accept DtTm
- if the patient does arrive on your unit, then the Arrive DtTm will be the physical arrival on the unit, while the Accept DtTm will be when the service accepted care of the patient
- to find the arrive date & time when using electronic patient record (epr): Arrive Date & Time are found by clicking on Registration (on top left bar), then Visit Location, then Location History. A new Location History window will pop up that will tell you the date & time that the patient arrived at a particular location. (e.g. patient arrived on E5 medicine from the emergency department on ___ date & ___ time.)
If the Accept DtTm > Arrive DtTm, make accept = arrive.
Data Use
Many things, need to pull them together Ttenbergen 12:59, 2016 March 21 (CDT)
Template:CCMDB Data Integrity Checks
Implemented:
- Function Dispo Chronological()
- Function long LOS()
- function Panelling_admit_transfer_same(Pat_ID): a record is an error if both
- Primary Admit Diagnosis = Panelling or Discharge Planning (90601 or 90602)
- (Transfer Ready DtTm) <> (Arrive DtTm)
- Minimal Data Set
Legacy
For Medicine this concept is related to old ER Wait date an time.
For ICU this concept is related to the old Admit date and time. Resp L_Log.R_AdmDate and L_Log.R_AdmTime.