Reconnect CFE and initial error checks: Difference between revisions

Revision as of 16:43, 2022 March 24

Once you "Pull" Centralized data.mdb you need to initialise the program and make sure that you have consistent initial data.

Click the "Re-connect Data" button
The program will now reset the connections from CFE to Centralized data.mdb, PHI.mdb and TISS28 Data.mdb
No more connections onTISS28 Data.mdb in CFE .PTorres 16:33, 2021 November 24 (CST)
the reconnector will confirm if L_Log table and L_PHI table have the same records in them. If they don't there will be an error; see Procedure when there are differences between L Log and L PHI for how to proceed
Run initial cross checks:
- PL_1orphans- see Orphans in Centralized data.mdb for what to do about these.
- PL missing L Tables content

- - Generally, errors in missing are the result of a failed send, so follow Re-sending data to fix.

	_dev_CFE re-name these so not PL any more not sure what I meant with this, need to check next time I am in there. Ttenbergen 22:27, 2022 February 17 (CST)	added: 2022-02-17 action: 2022-02-17

Continue what you were doing, likely the next step of Centralized data Vetting Process: Pre-linking checks

@@ Line 3: / Line 3: @@
 == Instructions ==
 * Click the [["Re-connect Data" button]]
-* Screen prompt 'Could not find file ... DSM...', answer '''YES'''
 * The program will now reset the connections from [[CFE]] to [[Centralized data.mdb]], [[PHI.mdb]] and [[TISS28 Data.mdb]]
 * No more  connections on[[TISS28 Data.mdb]] in CFE .[[User:PTorres|PTorres]] 16:33, 2021 November 24 (CST)