Arrive DtTm field: Difference between revisions

Revision as of 13:56, 3 July 2016

The Arrive DtTm field contains the date and time that a patient physically arrived on unit (Service/Location field).

For each patient enter the date and time when the patient physically arrived on the ward.

For off ward patients,

if the patient never does arrive on your unit, then the Arrive DtTm will be the same time as the Accept DtTm
if the patient does arrive on your unit, then the Arrive DtTm will be the physical arrival on the unit, while the Accept DtTm will be when the service accepted care of the patient

If the Accept DtTm > Arrive DtTm, make accept = arrive.

Many things, need to pull them together Ttenbergen 12:59, 2016 March 21 (CDT)

Implemented:

For Medicine this concept is related to old ER Wait date an time.

For ICU this concept is related to the old Admit date and time.

@@ Line 14: / Line 14: @@
 == {{CCMDB Data Integrity Checks}} ==
 Implemented:
-* function ''[[Dispo Chronological]]''
+* [[Function Dispo Chronological()]]
+* [[Function long LOS()]]
 * function ''Panelling_admit_transfer_same(Pat_ID)'': a record is an error if both
 ** [[Primary Admit Diagnosis]] = [[Panelling or Discharge Planning]] (90601 or 90602)
 ** ([[Transfer Ready DtTm]]) <> ([[Arrive DtTm]])
+* [[Minimal Data Set]]
-* [[Minimal Data Set]] - or at least the date part is, will need instructions for that. {{discussion}} how shall we handle this? Ttenbergen 11:30, 2016 June 27 (CDT)
-* Discussed with Trish, we'll allow 00:00 for minimal data set but time has to be not 00:00 to finalize. Ttenbergen 12:36, 2016 June 27 (CDT)
 == Legacy ==