Boarding Loc

Projects
Active?:	active
Program:	CC and Med
Requestor:	internal
Collection start:	2019-Sep-20
Collection end:

This isn't so much a project as way to track how patients physically move around the hospital. See Change from Service Location to Service, Boarding Loc and Transfer Ready DtTm tmp entry for information about it and why we needed to change it to this model.

This project tracks where and when a patient arrives into a new physical location under the Medicine or ICU service.

Data Collection Instructions

Sources for Boarding Loc DtTm

CSS / Cognos2 Unit Starter

Usually the Cognos Unit start time from CSS or Cognos2 Unit Starter can be used as Boarding Loc.

• sometimes the first Service tmp entry and first and second Boarding Loc all have the same date and time; see #Special Case - Can't have two Boarding Locs with same DtTm

First set of vital signs for CC

ICU Curriculum: The first set of vital signs is used as Boarding Loc dttm for arrival on the unit for Critical Care program admissions, if it is different from the Cognos Unit Start DtTm.

Erroneous Unit information in CSS/Cognos2 Unit Starter

Sometimes the times are not when people really show up at a location. Use what you know to be correct from chart and your knowledge of your hospital.

How to enter

You can use the "make loc" button to generate and pre-populate these entries.

• Use tmp fields:
  • Project: Boarding Loc
  • start_dt and start_tm:
    • enter as per Cognos initially
    • before setting RecordStatus to complete update the DtTm to comply with DtTm for First Boarding Loc and First Service
  • checkbox: not used for this project
  • Item:
    • for the initial unit or ER and each physical move to another unit, enter the location by using the "make loc" button in Patient Viewer Tab Cognos ADT2
    • if a boarding location appears in COGNOS but the patient does NOT move/arrive to that boarding location, do NOT enter that boarding location. We only capture boarding locations where the patient physically arrives (also see Wrong service or unit entries in Cognos)
      • if the ward is not available in the dropdown, please notify Tina, Lisa, and Julie; Tina/Lisa will add the location to the dropdown and update the wiki as needed

leave what is in Cognos, the main office doesn't use this part for anything for home locations, but it can be used to crosscheck accuracy. what is this about? Ttenbergen 17:42, 19 August 2025 (CDT)

• SMW

• Cargo

• Categories

• no location entered is the default
  • that entry will not be allowed in a complete record; it is automatically deleted when by Cognos Make Loc button, but needs to be removed before setting a record to complete if it is still present.

Combining Transfer Ready DtTm tmp entry and Boarding Loc records

• There needs to be one Transfer Ready DtTm tmp entry for each Boarding Loc and vice versa. To mark which entries belong together, use the same integer number in the "combiner" field in Patient Viewer Tab Cognos ADT2 for both records and in sequential order according to Boarding start_dt and start_tm. The presence of matching records is validated by query s_tmp_check_combined_Boarding_Loc_and_TransferReadyDtTm, and their sequential status by query s_tmp_check_combined_BL_and_TRDtTm_nonsequential.
• the integer number should be entered at the time that the paired Boarding Loc and Transfer Ready DtTm tmp entry are entered, as Julie uses this data early to report on

Special Case - Can't have two Boarding Locs with same DtTm

• No two different Boarding Loc records can have same start_dt and start_tm; if two locations have the same Start_DtTm in CSS/Cognos2 Unit Starter this is an error.
• The date and time for these entries must be confirmed by looking at the chart, specifically orders, flowsheets, and progress notes

It says: Change one to be off by one minute, put a note in Notes field to check boarding location to confirm the correct date and time for the boarding locations of concern. how does that fit in with reviewing reality in the chart? I don't know what you mean by this? It means you double check the correct first service and first and second boarding loc dttm Lisa Kaita 21:14, 6 September 2025 (CDT) Well, it seems like this triggers an error check, so you pull the times a minute apart to overcome the error check and put a note to remind you to check later. So either the check should run later (on complete or send) or we shouldn't have it at all. But a check that just gets you to "tweak" the data to make it go away isn't a good idea.

• SMW

• Cargo

• Categories

• This case is especially common in the context of DtTm for First Boarding Loc and First Service

Example:

Example: Not infrequently, the COGNOS data for HSC_SICU patients coming from the ER will show the first service, first boarding location (ER) and the second boarding location (SICU) as all having the same start_DtTm. Our solution for this is to change the second boarding location (SICU) to be off by one minute.

Special Case - GRA MICU boarding in GH-Emergency

This is a case of Patients who appear to transfer from in-patient situation to Emergency Room, see there for more info.

• Grace ICU boarding in ER choose Boarding Location GH-Emergency
• Grace Main ICU choose Boarding Location and GH-Intensive Care
• Grace Recovery Room (ICU) choose Boarding Location and GH-Recovery Room and enter comment Covid+ICU
• For External(SDC/NFA) ICU beds choose Boarding Loc and GH-External ICU and enter exact location in comments
• The Previous Location and Pre-admit Inpatient Institution would be <site>_med or <site>_ward

Special Case - Cross-program boarding

If a patient is accepted by one of our services, and is on an off-service ward, enter a Boarding Loc entry for that period.

For medicine pts boarding in ICU you can use the explicit ICU entry that applies because all CC locations are explicitly included in Boarding Loc.

what is this sentence telling me, can I not use the specific medicine entry? Why/how? What would a new collector need to know? I have no idea, I suppose this can happen although I have not ever seen this at any of the facilities, I believe you were the original author of this so feel free to do what you want with this Lisa Kaita 13:46, 6 August 2025 (CDT) Julie, do you know what this is about? If the same applies for Med as for ICU in this, then lets get rid of the confusing entry. Ttenbergen 17:23, 6 August 2025 (CDT) we have one case S4_STB_Med-2892 where first3 days at SBGH ICMS then transferred to SBGH-L2CC.--JMojica 16:42, 18 August 2025 (CDT) What else would they use? The entry would come from Cognos, no? It's entered by drop-down, so I don't think they could enter anything but the actual entry. Is this stated here really as a reminder for you, in case this happens again? If so, would it be better to store it in L_Problems table? If it is an instruction to collectors, would you explain further what you actually intend? Ttenbergen 17:33, 19 August 2025 (CDT)

• SMW

• Cargo

• Categories

For CC patients boarding on a Med ward where we collect, enter "GRA_Med"/"HSC_Med"/"STB_Med" as applicable. We added these boarding loc options specifically for this scenario, and they are available only for Critical Care program admissions.

Example:

This could happen if the team runs a code on a patient and accepts care for that patient, but for a period of time hasn't yet moved the patient. For Critical Care, you would enter a generic "<Site>_Med" "<Site>_Med" (ie GRA_Med, HSC_Med, STB_Med) for this patient so we don't have CC collectors keeping track of where regular, boarding or covid locations are.

Special Case - Visits to temporary locations that happen to be Boarding Locs

Occasionally a patient may be transferred to a location that is normally a Boarding Loc that we would enter or discharge to, however that location may be used as a temporary boarding location for a procedure. If after reading through the chart this is in fact the case, that Boarding Loc should not be entered, as it should be regarded as though the patient were going for any procedure and then back to their home ward location.

• Sometimes Visits to temporary locations may look like boarding locations. See that page for info on making the distinction.

Example:

Medicine patient is transferred to ICMS for a scope and is not admitted under critical care -> don't enter a Boarding Loc for ICMS

Special Case - parked in ER

For further information please see

• Parked in ER

Instructions that apply to both Boarding Loc and Service tmp entry

Special Case - Cognos data has different times for first Boarding Loc and Service tmp entry

See DtTm for First Boarding Loc and First Service

Start/End Dates of collection

• CC Start: 2018-July-19 as Project Borrow arrive and has been renamed and continued as Boarding Loc starting 2019-Sep-01
• Med Start: 2019-Sep-01: new admissions on and after this date.
• CC and Med Start Oct,1 2020 : modified according to PatientFollow Project to include ER as boarding loc.
• 2020-12-16: Change of GRA location names from "our" names to EPR/Cognos names
• 2022-01-01: Change of remaining location names from "our" names to EPR/Cognos names
• End: there is no planned end date

Data Integrity Checks (automatic list)

	App	Status
Check if awaiting code is primary dx then Transfer Ready DtTm must be equal to Arrive DtTm	CCMDB.accdb	declined
Query check_tmp_ER_Boarding_Loc_should_exist_if_from_ER	CCMDB.accdb	declined
Query check minimal data set incomplete	CCMDB.accdb	implemented
Query check tmp 2 BL TR S same tm	CCMDB.accdb	implemented
Query Check BL TR combiner null	CCMDB.accdb	implemented
Query check Transfer DtTm after paired BL and before later BL	CCMDB.accdb	implemented
Query s tmp Boarding Loc ER delay reasonable	CCMDB.accdb	implemented
Query check no consecutive same BL or Service	CCMDB.accdb	implemented
Query check CCI TISS matching BoardingLoc time	CCMDB.accdb	implemented
Query check tmp Boarding Loc Service first same	CCMDB.accdb	implemented
Query s tmp check Boarding Loc and TransferReadyDtTm pairs	CCMDB.accdb	implemented
Query s tmp check combined Boarding Loc and TransferReadyDtTm	CCMDB.accdb	implemented
Query check transfer DtTm during admission	CCMDB.accdb	implemented
Query check tmp Service and Boarding Loc during admission timeframe	CCMDB.accdb	implemented
Query check tmp service or location duplicate	CCMDB.accdb	implemented
Query s tmp Boarding Loc date item	CCMDB.accdb	implemented
Query Check_VADT_too_close_to_first_boarding_loc	CCMDB.accdb	needs review
Query check tmp Transfer Ready not before Boarding Loc	CCMDB.accdb	retired
Query s tmp check combined BL and TRDtTm nonsequential	CCMDB.accdb	retired
Query check transfer ready tmp for each Boarding Loc	CCMDB.accdb	retired
Query s tmp Boarding Loc no borrow but entry	CCMDB.accdb	retired

Data Use

Critical care and Medicine programs want to know this to better understand patient flow and bed utilization.

SAS Program

The SAS program calculates the time spent in a borrowed bed at each ICU stay and summarize the total bed-days in a given interval that are taken up by boarders from elsewhere and how much a certain unit is boarding elsewhere.

Time spent in borrowed bed = Next Arrival Date_time - First Arrival Date_time

where Next Arrival Date_time = Dispo Date_time if there is no more next arrival date_time.

The SAS program is saved in S:\MED\MED_CCMED\Julie\SAS_CFE\CFE_macros\prep_Tmp_BoardServiceTransfer.sas.

• the specific macros are %BoardingLoc, %ACCUBorrow, %ICUOtherService

Background

See Bed borrow as aggregator page for other boarding and borrow related concepts.

The concept of EMIPs which was similar from Bed borrow and collected separately before are now collected as part of Boarding Loc. See EMIP#Legacy information information for how they were collected before/

Related articles